Description
Overview
The Standard Brass Keyhole Anchor, also known as the Brass Anchor, is the top choice for installation professionals due to its simplicity and unmatched reliability. Perfect for securing safety nets, this anchor offers a robust and stable attachment point. Paired with our specialized Cone Head Clips, it ensures maximum strength and peace of mind in any environment.
Key Features
- Versatile Sizes: Available in three sizes—0.73 inches, 0.74 inches, and 0.75 inches—to suit various Core Bit conditions.
- Ease of Use: Designed for straightforward installation, fitting seamlessly into your setup.
- Durability: Made from high-quality brass, ensuring long-lasting performance.
Installation Guide
- Drill Preparation: Use a ¾ inch core drill bit to create a precise hole at least 2 inches deep. A core drill is preferred for accuracy over a hammer drill.
- Hole Cleaning: Clear debris from the hole using a high-pressure hose nozzle or needle-nose pliers for stubborn debris.
- Anchor Placement: Insert the Brass Keyhole Anchor with the narrow part of the keyhole facing the direction of the pull, typically towards the pool fence. The anchor should stop at the gnarled section.
- Hammering: Use a 28 oz. Dead Blow non-marring rubber mallet to gently hammer the anchor until it is flush with the deck, ensuring the keyhole faces the correct direction.
Tips for Optimal Results
- Deck Care: Position anchors at least 3 inches from the edge of the cement and any relief joints to prevent chipping.
- Brick Decks: Ensure bricks are securely fixed and the mortar is intact. Ideally, place anchors in the mortar between bricks to avoid cracking.
- Bit Wear: As drill bits wear down, the hole size may slightly decrease. Adjust anchor size accordingly to prevent deck damage.
For a secure and hassle-free setup, trust the Standard Brass Keyhole Anchor—the industry-standard for safety net installations.